EVALUATION OF DEPRECIATION METHOD USED BY MANUFACTURING FIRMS AND ITS EFFECTS ON PROFITABILITY A CASE STUDY OF BETA GLASS PLC, UGHELLI

EVALUATION OF DEPRECIATION METHOD USED BY MANUFACTURING FIRMS AND ITS EFFECTS ON PROFITABILITY A CASE STUDY OF BETA GLASS PLC, UGHELLI


1,686 marked this research material reliable.
Call or whatsapp: +2347063298784 or email: info@allprojectmaterials.com
Department: accounting project topics | Type: Project Topics | Project Topics and Materials | List of Project Topics | Research Project Materials | Journals | Thesis | Articles | Online Project Materials | Business Plan | Final year project topic | Format: Ms Word and PDF | Attribute: Documentation Only | Pages: 46 Pages | Chapters: Complete Research work from Chapter 1 to 5; All chapters | Inclusive: Abstract, Preliminary Pages, Table of Contents and Appendices | Cost: ₦ 5,000.00


EVALUATION OF DEPRECIATION METHOD USED BY MANUFACTURING FIRMS AND ITS EFFECTS ON PROFITABILITY A CASE STUDY OF BETA GLASS PLC, UGHELLI

PROJECT TOPICS AND MATERIALS ON EVALUATION OF DEPRECIATION METHOD USED BY MANUFACTURING FIRMS AND ITS EFFECTS ON PROFITABILITY A CASE STUDY OF BETA GLASS PLC, UGHELLI


ABSTARCT

 

   This project work concentrates upon evaluation of depreciation method used by manufacturing firms and its effect on profitability with special references to Beta Glass Plc Ughelli. Chapter one deals with background of the study, statement of the study, objective of the study, research question, and significance of the study and definition of terms.  Chapter two is literature review where authorities on the subject matter (Depreciation) were discussed. These include the different method for calculating for depreciation. Chapter three contains the methodology of the research, under this chapter, the method employed to source for data is both primary and secondary source. The statistical tool employ is the use of tables and simple percentage method. Chapter four base on Data presentation and analysis of result it also contain the discussion of findings while chapter five entails the findings, summary, conclusion, recommendation and suggestions for further study. The researcher discovered that depreciation of assets is very important in an organization because it help to determine the current value of assets at when financial statement is prepared. Therefore, the researcher recommended that management of organizations should provide for depreciation on yearly basic and the service of expertise that have good knowledge of depreciation should be engage so that current value of assets can be easily ascertained.

 

CHAPTER ONE

 

INTRODUCTION

 

1.1       Background of the Study

 

Most business have asset which are capital in nature e.g. building motor vehicle, furniture / fittings, etc. The cost of using these assets which benefits the business is written off to the profit and loss account over the life span of the assets is by the process called depreciation.

 

Depreciation is again justified is another way. The machine mentioned above contributes its quota towards productions just as an ordinary worker does and is being remunerated. The wage of such a worker is an expense to production which is charged against the trading, profit and loss account before the net profit is arrived at.

 

Today, it is agreed that depreciation is an expense that must be recorded whether or not revenue is sufficient to absorb it. As a result of controversial issue on depreciation in accounting many ways of evaluating depreciation have evolved.

 

An over view of the method of depreciation used by manufacturing fire are straight line methods, reducing balance method, sum of the year digit method, revaluation method etc.

 

Depreciation allows the spreading of the cost of fixed assets over their economic useful life. Depreciation is any method of attributing the historical or purchase cost of an asset across its useful life, roughly corresponding to normal wear and tear? Fixed assets are derecognized either on disposal or when economic benefit cease to accrue to a business. Therefore the only way in which costs of fixed assets are recognized in the profit and loss account is through charging depreciation.

 

1.2       Statement of the Research Problem

 

Depreciation in the value of asset is an expense. This is due to the use of asset in its provision is not optional but compulsory. It expenses is not deducted from the income of an accounting period, the ascertained profit will be wrong and will not disclose correct result of the business net profit.

 

But, a problem may arise in ascertaining the true profit of an organization due to the fact that there are different methods of providing for depreciation exposes in the book of the firm. The presence of those different methods may have various imparts which may lead to varieties in the reported net book value of an asset.

 

The use of the different depreciation methods by manufacturing firm in computing depreciation expenses bring about difference in the reported profit and net book value of assets in the balance sheet at the end of the year. This study is therefore embarked upon to investigate and report the effect of various method of depreciation on a firm net profit.

 

1.3       Objectives of the Study

 

The major purpose of the study is to evaluate the principles of depreciation provision using different methods and how depreciation computation using different methods affects the portability of firms.

 

Another purpose of this research work is to evaluate the impact which the various methods of depreciation provision have in the various methods of depreciation provision had in the profitability of firm.

Also, this research work will serve the purpose of evaluating how company uses depreciation to allocate the cost of a productive asset over the asset useful life.

1.4       Research Questions                 

 

(i.)         What are the depreciation methods uses by firms?

 

(ii.)        What forms the division of the firm to use particular methods?

 

(iii.)       To what extent can it be said that firms use different depreciation rate for different assets?

 

(iv.)      To what extent can it be said that there is an effect on the firm’s profitability by the different assets?

 

(v.)       How true can it be said that firm’s provision of depreciation really involves setting aside some money for the replacement of assets?

 

 

 

 

 

1.5       Significance of the Study

 

(i)           This project work will be of great significant to a lot of persons. It will enable existing manufacturing firm’s to know how to match depreciation cost of productive asset ( that has a useful life of more that a year ) to the revenues earned fro using the asset

 

(ii)          It will enable external stakeholders to know how to access the validity of a company depreciation method by using various strategies and analytical tools.

 

(iii)        This study will be useful for students and persons who are interested in knowing more about the subject matter.

 

(iv)        This study can be basis for further study on the subject matter.

 

(v)         It is a ready tool for policy formulations.

 

1.6       Scope of the Study

 

In the course of this study, the researcher was faced with some problems. Amongst such is basically financial constraints and time. However the data collected were sufficient for the purpose of this project.

 

1.7       Definitions of Terms

 

Some of the terms usually associated with depreciation in accounting may not be familiar to most people as such; some of the terms are defined below:

 

Depreciation cost: This is the cost of an asset less residual value. The cost of an asset means the purchases price involved in acquiring the asset.

Accumulated depreciation: This is the computation of any part in the time of the original cost already written off as an expense. In effects, it shows by how much the asset has fallen in value.

Fixed assets: These are those assets that are capable of lasting more than one year e.g. Land and building. Furniture / fitting vehicles, plants and Machinery, etc.

Tangle assets: There are those assets that can be seen and be touched and have materials existence such as stock, cash and plant etc.

Scrap value: This is amount that will be realized if the asset is been dispose off (sold).

Estimated useful life: This is the number of years the asset is expected to last in the business.

DOWNLOAD COMPLETE WORK FOR EVALUATION OF DEPRECIATION METHOD USED BY MANUFACTURING FIRMS AND ITS EFFECTS ON PROFITABILITY A CASE STUDY OF BETA GLASS PLC, UGHELLI


Additional Information

  • The Project Material is available for download.
  • The Research material is delivered within 15-30 Minutes.
  • The Material is complete from Preliminary Pages to References.
  • Well Researched and Approved for supervision.
  • Click the download button below to get the complete project material.

Frequently Asked Questions

In-order to give you the best service available online, we have compiled frequently asked questions (FAQ) from our clients so as to answer them and make your visit much more interesting.

We are proudly Nigerians, and we are well aware of fraudulent activities that has been ongoing in the internet. To make it well known to our customers, we are geniune and duely registered with the Corporate Affairs Commission of the republic of Nigeria. Remember, Fraudulent sites can NEVER post bank accounts or contact address which contains personal information. Free chapter One is always given on the site to prove to you that we have the material. If you are unable to view the free chapter 1 send an email to info@researchcub.info with the subject head "FREE CHAPTER 1' plus the topic. You will get a free chapter 1 within an hour. You can also check out what our happy clients have to say.


Students are always advised to use our materials as guide. However, if you have a different case study, you may need to consult one of our professional writers to help you with that. Depending on similarity of the organization/industry you may modify if you wish.


We have professional writers in various disciplines. If you have a fresh topic, just click Hire a Writer or click here to fill the form and one of our writers will contact you shortly.


Yes it is a complete research project. We ensure that our client receives complete project materials which includes chapters 1-5, full references, questionnaires/secondary data, etc.


Depending on how fast your request is acknowledged by us, you will get the complete project material withing 15-30 minutes. However, on a very good day you can still get it within 5 minutes!

What Clients Say

Our Researchers are happy, see what they are saying. Share your own experience with the world.
Be polite and honest, as we seek to expand our business and reach more people. Thank you.

A Research proposal for evaluation of depreciation method used by manufacturing firms and its effects on profitability a case study of beta glass plc, ughelli:
Reviews: A Review on evaluation of depreciation method used by manufacturing firms and its effects on profitability a case study of beta glass plc, ughelli, evaluation, depreciation, method project topics, researchcub.info, project topic, list of project topics, research project topics, journals, books, Academic writer.
This project work concentrates upon evaluation of depreciation method used by manufacturing firms and its effect on profitability with special references to Beta Glass Plc Ughelli. Chapter one deals with background of the study, statement of the study, objective of the study, research question, and significance of the study and definition of terms. Chapter two is literature review where authorities on the subject matter (Depreciation) were discussed. These include the different method for calculating for depreciation. Chapter three contains the methodology of the research, under this chapter, the method employed to source for data is both primary and secondary source. The statistical tool employ is the use of tables and simple percentage method. Chapter four base on Data presentation and analysis of result it also contain the discussion of findings while chapter five entails the findings, summary, conclusion, recommendation and suggestions for further study. The researcher discovered that depreciation of assets is very important in an organization because it help to determine the current value of assets at when financial statement is prepared. Therefore, the researcher recommended that management of organizations should provide for depreciation on yearly basic and the service of expertise that have good knowledge of depreciation should be engage so that current value of assets can be easily ascertained... accounting project topics

EVALUATION OF DEPRECIATION METHOD USED BY MANUFACTURING FIRMS AND ITS EFFECTS ON PROFITABILITY A CASE STUDY OF BETA GLASS PLC, UGHELLI

Project Information

Share Links

Download Post (MsWord)
Download Post (PDF)

Search for Project Topics

Project topics in Departments

How much does it cost to hire a writer in Nigeria?

Looking for Professional Approach and Quality Research Services ?

Estimating the cost of research writing in Nigeria: Freelance writers in Nigeria may charge depending on the project, depending on the factors mentioned earlier. Plagiarism-focused content may be on the higher end of this range due to the additional skills and research involved. For a more accurate estimate, it's recommended to reach out with us, discuss your specific requirements, and request a quote based on the scope of your project. Prices can vary, so getting personalized quotes will help you determine the cost more precisely.