This project work is designed to give an insight into the
application of statistical quality control in the building products
industries in order to help manufacturers understand the importance of
applying statistical techniques in controlling quality products. In
addition to make consumers have faith in standard quality of products
It must also be remembered that goods are competitive,
for producers to excel in the competitive market; their products must
match in quality with those of their counterparts.
This project work has seemingly and exhaustively x-rays
the quality of Emenite roofing products in order to check why products
are not meeting customers expectations. From the analysis using
statistical quality control procedures that discovered that corrugated
sheets staged from their means which consequently resulted from the
process average being out of control.
Generally, this research work is a bird eye new of what
quality control techniques can do for checking, monitoring and enhancing
TABLE OF CONTENTS
CHAPTER ONE: INTRODUCTION
1.1 Background of the study
1.2 Purpose of the study
1.3 Significance of the study
1.4 Statement of research problem
1.5 Research hypothesis
1.6 Scope of the study
1.7 Definition of key terms
2.2 Meaning of statistical quality control
2.3 Origin of quality control
2.4 Statistical techniques in quality control
2.5 Important of statistical quality control officer
3.2 Data collection method
3.3 Population and sample
3.4 Technique for analysis
PRESENTATION, ANALYSIS AND INTEPRETATION
4.2 Quality control chart
4.3 Laboratory record of measurement of flatsheets
4.4 Laboratory record of measurement of corrugated sheet
4.5 To check process average & variability for that sheet
4.6 To check process average & variability for corrugated
4.7 Determination of the process standards
SUMMARY, CONCLUSION AND RECOMMENDATION
1.1 BACKGROUND OF THE STUDY
Emenite Limited Enugu a member of the Beligian Etex Group
started operation in 1963 under the name “Turners Asbestos Cement
Company Nigeria Limited: The company was incorporated in 1961 with
registration number RC 2712.
The group came to Nigeria with the establishment of her
first of four companies in Ikeja, Lagos, Nigeria Limited. The other
three are Eternite Limited, Sapele, Giwarite Limited, Kano and Emenite
Emenite Limited after being established have to following as shareholders.
Turners & Newall Ltd - 80%
Government of Eastern Nigeria - 20%
As a result of the indigenization decree of 1973, the shareholders of the company changed as follows
Turners & Newall Ltd - 60%
Government of Eastern Nigeria - 40%
With the name of the company changing to Turners Building Product (Emene) Limited.
Due to dwindling fortunes of the company, in March 24,
1988 Turners and Newall Ltd divested its interest in the company and
transferred 51% of its shareholding to Eteroutremer Societe Anonyme of
Belgium (now Etex Group S.A) and the balance of 49% went to the then
Anambra and Imo State; now Anambra, Enugu, Imo, Abia and Ebonyi States.
As a result of the new shareholding arrangement, the company changed
its name to Emenite Limited as its presently known.
Emenite Limited after being established in 1963 rolled
out her first finished sheets in December that year. The company has a
total workforce as at its establishment of 67 staff, its second machine
was installed in 1979 while the third was installed in 1983. From a
workforce of 67 to 225 staff, from one shift machine to three, from
14,000 tonnes of roofing and ceiling sheets to 50,000 tonnes per year.
The company has continued to grow tremendously.
The company has made considerable progress in terms of
product development in the market. It operates in the roofing and
ceiling market, its range of products include: Bigsix & standard
ultimate corrugated sheets of different colours (Grey, Red & Green),
prestige concrete tile, Emcee flat sheet, duraceile decorative ceiling,
Emlux decorative ceiling as well as Qualitile decorative ceiling and a
new product called duratile. These products are sold through a wide
range of distribution network located in such a place that they will be
close to project sites. Emenite is 150 certified, 150 9002 in 1998, 180
9001 in 2002.
It is the company’s quality policy to provide high
quality building products to the markets. But much recently there have
been complaints from building and construction companies over the
quality durability of her products. It is in view of this problem this
research work is being undertaken.
1.2 PURPOSE OF THE STUDY
Consumers of goods and services rely on quality standard
products displayed for consumers. What is responsible for this trend?
Is statistical quality control standard still made use of in
industries? This are what this research project intend to solve and
make appropriate recommendation.
The project research will
1. Determine the process standards and establish the process capability
2. Check if the process average and variability are under control in respect of the measurement of flat sheet.
3. Check if the process average and variability are under control in respect of the measurement of corrugated sheets
4. Set up appropriate control charts for monitoring the future output of the process.
1.3 SIGNIFICANCE OF THE STUDY
The significance of this research work is to provide information for
the management to fine – tune its quality policy concerning their
products as obtained in this analysis of this research work. This will
be of benefits t o the producers and consumers as well.
1.4 STATEMENT OF RESEARCH PROBLEM
There have been complaints and doubts that most asbestos
roofing sheets in recent times full short of required standard, also
whether established standardize are still maintained. This was as a
result of reported cases of easy damage and non-durable nature of these
In view of this, the researcher intends to carry out this research using Emenite Limited Enugu as a case study.
1.5 RESEARCH HYPOTHESIS
H0: The process is under control in respect of the average and variability of the measurement of flat sheets.
H1: The process is not under control in respect of the average and variability of the measurement of flat sheets
H0: The process is under control in respect of the average and variability of the measurement of corrugated sheets
H1: The process is not under control in respect of the average and variability of the measurement of corrugated sheets.
1.6 SCOPE OF THE STUDY
The scope of this study is limited to Emenite only in
order to conclude the research work at the assigned period and the
findings will be used to infer on the industry.
1.7 DEFINITION OF KEY TERMS
VARIATION: This is a deviation from the normal standard or condition
DATA: These are sets of figures, raw information
that is yet to be processed. e.g population data, employment data etc.
CONTROL CHARTS: It is the graphical display of the actual
measurement of the characteristic on a chart showing limit which reflect
the process capability on the particular quality characteristics.
PROCESS CONTROL: This is the act of observing the functions
of each of the factors leading to the production of goods on a
continuous basis to ensure the process or means of production are kept
in optimum conditions.
PRODUCT CONTROL: Product control is the act of measuring or
observing different attributes of quality specification of a product
with the aim of ensuring that the product conform to specification.
This is done of taking a sample from a batch of inspection lot with the
aim of accepting or rejecting it.
STATISTICAL QUALITY CONTROL: This is the technique of sampling
at every stage of production and statistical inferences are taken about
the variability of the product quality.
PROCESS CAPABILITY: This is the mini9mum spread of specific
measurement variation which will include about 99.73% of all
measurements from the process.