DESIGN AND CONSTRUCTION OF A PYRAMID-SHAPED SOLAR

Type: Project Materials | Format: Ms Word | Attribute: Documentation Only | Pages: 21 Pages | Chapters: 1-5 chapters | Price: ₦ 3,000.00

1,525 marked this research material reliable.
Call or whatsapp: +2347063298784 or email: info@allprojectmaterials.com
DESIGN AND CONSTRUCTION OF A PYRAMID-SHAPED SOLAR

CHAPTER ONE

1.1 INTRODUCTION

Distilled water is needed for drinking, irrigation and for many other applications. A diversity of approaches are used for these portions of fresh water from saline water; namely multi stage flash (MSF), multiple effect (ME), reverse osmosis (RO), electro dialysis, ion exchange, phase change, and solvent extraction. These methods are expensive, however, for the production of small amount of fresh water. The development of solar distillation has demonstrated its suitability for the desalination process when the weather conditions are suitable and the demand is not too large, i.e. less than 200 m³/d. The problem of low daily productivity of the solar stills triggered scientists to investigate various means of improving the stills productivity and thermal efficiency.

Different aspects of triangular-shaped solar stills (CSS), also called double slope stills, have been studied. Production in this still is influenced by the orientation, as shown by (Singh et al., 1995) who found the maximum yield for a cover with east–west. Detailed studies of heat transfer coefficients can also be found, (Sharma and Mullick, 1991), in which energy transfer mechanisms, such as convection, evaporation and radiation are investigated, and new empirical relations to estimate cover temperatures are proposed. To model heat and mass transfer in solar stills ( Dunkle, 1961)  proposed the use of a correlation of the form  where C is 0.075 and n is 1/3 for air enclosed between horizontal parallel plates. This correlation is expressed in terms of a modified temperature difference that includes molecular weight and buoyancy, and considers the cover as a single element. This has been the most widely accepted model for solar stills and describes the basic heat and mass transport mechanism between heated water mass and a condenser.

 

1.2   PROBLEM DESCRIPTION AND SIGNIFICANCE

Many parts of the world do not have access to a suitable source of clean drinking water. Most of the water available in streams, lakes, rivers, sea, etc. carries parasites or diseases, or is simply not fit for consumption and therefore is a significant health hazard. Areas without access to clean water are also usually poverty stricken and do not have the infrastructure necessary to create and support large scale water purification plants. Thus, there is need for a small scale, affordable water purification system for individual families or villages. Africa has the second largest population of people without access to clean drinking water.

1.2AIM AND OBJECTIVES

  1. a.     The aim of this project is to construct pyramid-shaped solar.                                                                                                                                                                                                                                                                                                  
  2. To compare and evaluate the triangular and pyramid-shaped                                                  solar stills.

1.3 SIGNIFICANCE OF THE STUDY

The energy from the sunused to distil water is free cost, but building the still makes the costof the distilled rather high, water at least for large-scale uses and such as agriculture and flushing away wastes in industry andhomes. Consequently, the solar still is used principally to purify water for drinking and for some business, industries, laboratories, and green house applications; it also appears to be able to purify polluted water

DESIGN AND CONSTRUCTION OF A PYRAMID-SHAPED SOLAR

Additional Information

  • The Project Material is available for download.
  • The Research material is delivered within 15-30 Minutes.
  • The Material is complete from Preliminary Pages to References.
  • Well Researched and Approved for supervision.
  • Click the download button below to get the complete project material.

Frequently Asked Questions

In-order to give you the best service available online, we have compiled frequently asked questions (FAQ) from our clients so as to answer them and make your visit much more interesting.

We are proudly Nigerians, and we are well aware of fraudulent activities that has been ongoing in the internet. To make it well known to our customers, we are geniune and duely registered with the Corporate Affairs Commission of the republic of Nigeria. Remember, Fraudulent sites can NEVER post bank accounts or contact address which contains personal information. Free chapter One is always given on the site to prove to you that we have the material. If you are unable to view the free chapter 1 send an email to info@allprojectmaterials.com with the subject head "FREE CHAPTER 1' plus the topic. You will get a free chapter 1 within an hour. You can also check out what our happy clients have to say.


Students are always advised to use our materials as guide. However, if you have a different case study, you may need to consult one of our professional writers to help you with that. Depending on similarity of the organization/industry you may modify if you wish.


We have professional writers in various disciplines. If you have a fresh topic, just click Hire a Writer or click here to fill the form and one of our writers will contact you shortly.


Yes it is a complete research project. We ensure that our client receives complete project materials which includes chapters 1-5, full references, questionnaires/secondary data, etc.


Depending on how fast your request is acknowledged by us, you will get the complete project material withing 15-30 minutes. However, on a very good day you can still get it within 5 minutes!

What Clients Say

Our Researchers are happy, see what they are saying. Share your own experience with the world.
Be polite and honest, as we seek to expand our business and reach more people. Thank you.

A Research proposal for design and construction of a pyramid-shaped solar:
Reviews: A Review on design and construction of a pyramid-shaped solar, design, construction, pyramidshaped project topics, researchcub.info, project topic, list of project topics, research project topics, journals, books, Academic writer.
Distilled water is needed for drinking, irrigation and for many other applications. A diversity of approaches are used for these portions of fresh water from saline water; namely multi stage flash (MSF), multiple effect (ME), reverse osmosis (RO), electro dialysis, ion exchange, phase change, and solvent extraction. These methods are expensive, however, for the production of small amount of fresh water. The development of solar distillation has demonstrated its suitability for the desalination process when the weather conditions are suitable and the demand is not too large, i.e. less than 200 m³/d. The problem of low daily productivity of the solar stills triggered scientists to investigate various means of improving the stills productivity and thermal efficiency... physics project topics

DESIGN AND CONSTRUCTION OF A PYRAMID-SHAPED SOLAR

Project Information

  • CATEGORY : PHYSICS
  • TYPE : PROJECT MATERIAL
  • FORMAT : MICROSOFT WORD
  • ATTRIBUTE : Documentation Only
  • PAGES : 21 Pages
  • CHAPTERS : 1 - 5
  • PRICE : ₦ 3,000.00

Share Links

Download Post
Download Post

Search for Project Topics

Project topics in Departments

Do you need a writer for your academic work?