CONSTRUCTION OF TWO FACE GAS BURNER

Type: Project Materials | Format: Ms Word | Attribute: Documentation Only | Pages: 55 Pages | Chapters: 1-5 chapters | Price: ₦ 3,000.00

1,809 marked this research material reliable.
Call or whatsapp: +2347063298784 or email: info@allprojectmaterials.com
Excellent and professional research project topics and materials website. All the research tools, journals, seminars, essays, article, books, term papers, softwares and project materials for your research guide and final year projects are available here.

CHAPTER ONE

INTRODUCTION

The construction of a two-face gas burner as a project topic that we embark upon become necessary as a way of way of putting into application the engineering and technological knowledge acquired so far. It is a starting point of actualizing a functional technology in the country. Irrespective of the fact that there are several breads of gas burners in the market, especially the ones imported, we deemed it necessary to work further on it as a way of modifying the brand with cast not left out in such modification.  

1.2     LITERATURE REVIEW
          The development of simple gas burner started in the eighteen countries when people began to use coal gas for burning. The application was fast put into practice by William Mulock who designed the simple gas cooker to be used in his office, home and workplace
The first experimental gas cooker was made and in use in 1850. The improvement of this has multiplied greatly and is up to date widely used in homes, restaurants and large catering establishments. The different types of gas cookers available in the in the market are based on skills and techniques of the designer or producer.
Based on the nature of energy supply, some gas cookers are made up of combustion devices of an electric heating element. The well-constructed ones are properly adapted and form an integral combustion of which of which they generate and utilize heat. It is often quite different to draw a line where heat generation stops and where heat utilization starts in a fuel forced cooker. That is the fuel fired cooker being on the pack in the market these days.
The releasing of heart starts with mixture of air and fuel gas in the nozzle and combustion of the mixture to release heart takes place at the burner.

1.3     SPECIFICATION OF PROBLEM
In the course of fabricating the two-face gas burner, as a copied project with some propose modification, some condition which ought to be met are found as a standard of comparison with the already existing ones. This posed a difficulty in the course of this construction. Since choice between already existing gas cooker lies on service available, durability, connivance cost.
The following specifications were considered a problem when we started the design.

  1. PORTABILITY.

How to fabricate a two-face gas burner that will occupy the minimum space in the kitchen was a problem. A two-face gas burner that is easily to be met in met in our design.

  1. To construct a two-face gas burner that will be safe to any prospective user.
  2. To constructs a two-face gas burner that will be easy to maintain and wise gas will be free from unpleasant smell.
  3. To construct a two-face gas burner whose source of energy (fuel) will be local.
    1. COMPONENT PARTS AND THEIR FUNCTIONS
  1. Burner chamber
  2. Linkage pipe
  3. Hose
  4. Gas Cylinder (containing gas valve)
  5. Angle bar (material)
  6. Control knob or valve
  7. Connection pipe for gas flow
  8. Nut
  9. Rod.

THE BURNER: This being the main component where combustion takes place to release heat. There is gas delivery line, which leads to it in addition to an adjustment to control the rate of atmospheric air mixing with the natural gas
1510 

 


                                                                                                                                                                                                                                                                                                                                                                                                                            

LINKAGE PILE:         This is the pipe line through which natural gas flow to the burner. One is lined along the frame of the burner as seen. 

1511 


THE GAS CYLINDER:        This is the component of the gas burner that containing the gas fuel through which a hose as connected to the copper pipe of the burner through the gas passes to the burner for combustion.
1512 

 


1513THE ANGLE BAR:     This was used in constructing the frame of the gas burner.

 

1514HOSE:       This serves as a link between the copper tubing and the control value of the burner.

1515CONTROL KNOB OR VALVE:   It is a essential component of the gas burner and it is used to regulate the volume or amount of natural gas flowing to the burner.

15161517 

 

 

 


MILD STELL PLATE this is used as a covering or a wall for the gas burner. It also serves as a seat for the values.

1518 

 



CHAPTER TWO

COMBUSTION MECHANISM/THEORY OF THE GAS BURNER

    1. DESCRIPTION OF COMBUSTION DEVICE.

There are different types of commercially fixed gas burner and combustion equipment in which usage. Some knowledge of this type of burner, combustion and aerodynamics within a plant is therefore essential if a physical study is to be a success.
The combustion equipment is usually selected to satisfy a range of design requirement including firmly rate, flame length and shape, temperature and combustion product. All these factors influence the heat transfer, hence the thermal efficiency of the burner in a particular and on the nature on its aerodynamics behaviour when installed in plant.
In practice, many burner fall into categories which has deterring implication

2.2     PRE-MIX OR NOZZLE AIR BAST BURNER

          In both cases, flame stabilization is commonly achieved by employing a refractory tunnel downstream at the burner head with combustion substantially completed within the tunnel. This

CONSTRUCTION OF TWO FACE GAS BURNER

Additional Information

  • The Project Material is available for download.
  • The Research material is delivered within 15-30 Minutes.
  • The Material is complete from Preliminary Pages to References.
  • Well Researched and Approved for supervision.
  • Click the download button below to get the complete project material.

Frequently Asked Questions

In-order to give you the best service available online, we have compiled frequently asked questions (FAQ) from our clients so as to answer them and make your visit much more interesting.

We are proudly Nigerians, and we are well aware of fraudulent activities that has been ongoing in the internet. To make it well known to our customers, we are geniune and duely registered with the Corporate Affairs Commission of the republic of Nigeria. Remember, Fraudulent sites can NEVER post bank accounts or contact address which contains personal information. Free chapter One is always given on the site to prove to you that we have the material. If you are unable to view the free chapter 1 send an email to info@allprojectmaterials.com with the subject head "FREE CHAPTER 1' plus the topic. You will get a free chapter 1 within an hour. You can also check out what our happy clients have to say.


Students are always advised to use our materials as guide. However, if you have a different case study, you may need to consult one of our professional writers to help you with that. Depending on similarity of the organization/industry you may modify if you wish.


We have professional writers in various disciplines. If you have a fresh topic, just click Hire a Writer or click here to fill the form and one of our writers will contact you shortly.


Yes it is a complete research project. We ensure that our client receives complete project materials which includes chapters 1-5, full references, questionnaires/secondary data, etc.


Depending on how fast your request is acknowledged by us, you will get the complete project material withing 15-30 minutes. However, on a very good day you can still get it within 5 minutes!

What Clients Say

Our Researchers are happy, see what they are saying. Share your own experience with the world.
Be polite and honest, as we seek to expand our business and reach more people. Thank you.

Project Information

  • CATEGORY : MECHANICAL ENGINEERING
  • TYPE : PROJECT MATERIAL
  • FORMAT : MICROSOFT WORD
  • ATTRIBUTE : Documentation Only
  • PAGES : 55 Pages
  • CHAPTERS : 1 - 5
  • PRICE : ₦ 3,000.00

Share Links

Download Post
Download Post

Search for Project Topics

Project topics in Departments

Do you need a writer for your academic work?

Reviews:
A Review on construction of two face gas burner, construction, face, burner project topics, researchcub.info, project topic, list of project topics, research project topics, journals, books, Academic writer.
The construction of a two-face gas burner as a project topic that we embark upon become necessary as a way of way of putting into application the engineering and technological knowledge acquired so far. It is a starting point of actualizing a functional technology in the country. Irrespective of the fact that there are several breads of gas burners in the market, especially the ones imported, we deemed it necessary to work further on it as a way of modifying the brand with cast not left out in such modification. .. mechanical engineering project topics

CONSTRUCTION OF TWO FACE GAS BURNER