DESIGN, FABRICATION AND TESTING OF A SCREW PRESS BRIQUETTING MACHINE

Type: Project Materials | Format: Ms Word | Attribute: Documentation Only | Pages: 95 Pages | Chapters: 1-5 chapters | Price: ₦ 3,000.00

2,407 marked this research material reliable.
Call or whatsapp: +2347063298784 or email: info@allprojectmaterials.com
Excellent and professional research project topics and materials website. All the research tools, journals, seminars, essays, article, books, term papers, softwares and project materials for your research guide and final year projects are available here.

ABSTRACT

 

Globally, there exist a continuous increase in the demand and cost of energy. There is continuous pollution of the atmosphere as carbon dioxide is emitted continuously into the atmosphere as a result of man’s use of fossil fuels for everyday activities. Deforestation is highly practiced in Nigeria, most especially in her rural areas as people rely on wood for domestic cooking and other heating purposes due to the high cost of conventional fuels. And so there is a large percentage of carbon dioxide in the atmosphere as the trees are no longer available to take in the carbon dioxide and give out oxygen. This results in the change in climatic conditions globally. Briquetting technology seeks to address this problem as it has less environmental impact when compared to conventional energy technologies. It is waste to wealth technology. Agricultural wastes are readily available in large quantities all over the country. Thus, costs of producing the briquettes is very small.

This study presents the development of a screw press briquetting machine with a grinder attached. Prior to this time, the biomass to be used for briquetting was grinded in a grinding machine before transportation to the briquetting machine for it to be briquetted. Other essential components of the machine are the screw shaft, the die and the heating system made up of two heating elements. When tested, the grinder performed satisfactorily as the particles were grinded to sizes less than 2mm. The machine is easy to use and can easily be maintained locally. The efficiency of the machine is 90%.


TABLE OF CONTENT

 

CERTIFICATION.. ii

DEDICATION.. iii

ACKNOWLEDGEMENT.. iv

ABSTRACT.. v

TABLE OF CONTENT.. vi

LIST OF FIGURES. xi

LIST OF TABLES. xiii

LIST OF PLATES. xiv

CHAPTER 1. 1

INTRODUCTION.. 1

1.1        BACKGROUND OF STUDY.. 1

1.2 STATEMENT OF THE PROBLEM... 3

1.3 AIM AND OBJECTIVES. 3

1.3.1 AIM... 3

1.3.2 OBJECTIVES. 3

1.4 SIGNIFICANCE OF THE WORK.. 4

1.5 SCOPE OF THE WORK.. 4

CHAPTER 2. 6

LITERATURE REVIEW... 6

2.1 RENEWABLE ENERGY.. 6

2.1.1 SOLAR ENERGY.. 6

2.1.2 WIND ENERGY.. 6

2.1.3 HYDRO-ENERGY.. 7

2.2 BIOMASS. 7

2.3 WHAT BRIQUETTING ENTAILS. 9

2.3.1 TYPES OF BRIQUETTING.. 10

2.3.2 ADVANTAGES OF BRIQUETTING.. 10

2.3.3 LIMITATIONS OF BRIQUETTING.. 11

2.3.4 BRIQUETTING MATERIAL.. 11

2.4 PRINCIPLES OF A BRIQUETTE MACHINES. 14

2.4.1 SCREW PRESSES. 14

2.4.2 PISTON PRESSES. 14

2.4.3 MECHANICAL PISTON PRESS. 14

2.4.4 HYDRAULIC PISTON PRESSES. 15

2.4.5 PELLET PRESSES. 15

2.5 FACTORS AFFECTING BIOMASS BRIQUETTING.. 16

2.5.1 EFFECTS OF PARTICLE SIZE.. 16

2.5.2 EFFECTS OF MOISTURE.. 17

2.5.3 EFFECTS OF TEMPERATURE OF BIOMASS. 17

2.5.4 EFFECTS OF TEMPERATURE OF DIE.. 18

2.5.5 EFFECTS OF EXTERNAL ADDITIVES. 18

2.6 SAWDUST AS A BRIQUETTE MATERIAL.. 18

2.7 GROUNDNUT AS A BRIQUETTE MATERIAL.. 20

CHAPTER 3. 22

METHODOLOGY.. 22

3.0 MATERIALS AND METHODS. 22

3.1 DESIGN AND ANALYSIS OF SOME MACHINE PARTS. 23

3.1.1 DESIGN ANALYSIS OF THE FRAME.. 23

3.1.2 DESIGN ANALYSIS OF HOPPER, V.. 24

3.1.3 DESIGN OF GRINDING CHAMBER.. 25

3.1.3(a) VOLUME OF GRINDING CHAMBER, Vg 25

3.1.3(b) VOLUME OF CHAMBER ENTRANCE, VE. 26

3.1.3(c) TOTAL VOLUME OF GRINDING CHAMBER WITHOUT BLADE, VG. 26

3.1.3(d) VOLUME OF BLADE SHAFT, VBS. 26

3.1.3(e) VOLUME OF BLADES, VBB. 27

3.1.3(f) VOLUME OF BLADE WITH BLADE SHAFT, VB. 27

3.1.3(g) VOLUME OF GRINDER CHAMBER WITH CUTTING BLADE, VGB. 27

3.1.4 DESIGN OF GRINDER CHANNEL.. 27

3.1.4(a) VOLUME OF GRINDER CHANNEL, VGC. 28

3.1.5 DESIGN OF BARREL HOUSING.. 28

3.1.5(a) VOLUME OF BARREL HOUSING, VB. 28

3.1.5(b) VOLUME OF SCREWSHAFT HOUSING, VSS. 28

3.1.5(c) VOLUME OF DIE, VC. 29

3.1.6 DESIGN OF SCREWSHAFT. 30

3.1.6(a) VOLUME OF SCREWSHAFT, VSC. 31

3.1.6(b) VOLUME OF SCREWSHAFT FRUSTUM, Vf 31

3.1.6(c) VOLUME OF BARREL WITH SCREWSHAFT. 32

3.1.7 TOTAL VOLUME OF BRIQUETTE MACHINE.. 32

3.2 DIAMETER OF PULLEY.. 32

3.2.1 DETERMINATION OF THE DIAMETER OF SCREW SHAFT PULLEY, D2 33

3.2.2 DETERMINATION OF THE DIAMETER OF GRINDER SHAFT PULLEY, D3 33

3.3 CALCULATION FOR LENGTH OF BELT. 33

3.3.1 LENGTH OF BELT FOR SCREWSHAFT-ELECTRIC MOTOR PULLEY.. 34

3.3.2 LENGTH OF BELT FOR SCREWSHAFT-GRINDER SHAFT PULLEY.. 34

3.4 CALCULATION FOR SPEED BELT. 34

3.5 COEFFICIENT OF FRICTION BETWEEN BELT AND PULLEY.. 34

3.6 CALCULATION FOR WRAP ANGLE ????.. 35

3.6.1 WRAP ANGLE FOR SCREWSHAFT-ELECTRIC MOTOR.. 35

3.6.2 WRAP ANGLE FOR SCREWSHAFT-GRINDER SHAFT. 35

3.7 ANGLE OF CONTACT, ????.. 36

3.7.1 ANGLE OF CONTACT FOR SCREWSHAFT-MOTOR, ????1 36

3.7.2 ANGLE OF CONTACT FOR SCREWSHAFT-GRINDER SHAFT, ????2 36

3.8 CALCULATION FOR TENSION OF BELT. 37

3.8.1 SLACK TENSION FOR SCREWSHAFT-ELECTRIC MOTOR BELT, T21 38

3.8.2 SLACK TENSION FOR SCREWSHAFT-GRINDER SHAFT BELT, T22 39

3.9 CALCULATION FOR TORQUE, T. 39

3.9.1 TORQUE TRANSMITTED BY MOTOR PULLEY, Tm. 39

3.9.2 TORQUE TRANSMITTED BY SCREW SHAFT PULLEY.. 40

3.9.3 TORQUE TRANSMITTED BY GRINDER PULLEY.. 40

3.10 POWER TRANSMITTED BY THE BELTS. 40

3.10.1 POWER TRANSMITTED BY SCREWSHAFT-MOTOR BELTS, Psm. 41

3.10.2 POWER TRANSMITTED BY SCREWSHAFT-GRINDER SHAFT BELT, Psg 41

3.11 CALCULATIONS FOR SHAFT. 41

3.11.2 POWER GENERATED OF SHAFTS. 41

3.11.2(a) POWER GENERATED BY SCREWSHAFT. 42

3.11.2(b) POWER GENERATED BY GRINDER SHAFT. 42

3.11.2(c) POWER GENERATED BY MOTOR SHAFT. 42

3.11.3 TWISTING MOMENT OF SHAFT DUE TO TENSION OF BELT, Mt 42

3.11.4 BENDING MOMENT OF SHAFT DUE TO TENSION OF BELT, Mb 43

3.11.4(a) BENDING MOMENT OF GRINDER SHAFT. 43

3.11.4(b) BENDING MOMENT OF SCREWSHAFT. 43

3.11.4(c) BENDING MOMENT OF MOTOR SHAFT. 43

3.11.5 EQUIVALENT TWISTING MOMENT OF THE SHAFTS, Te 43

3.11.5(a) EQUIVALENT TWISTING MOMENT FOR GRINDER SHAFT. 44

3.11.5(b) EQUIVALENT TWISTING MOMENT FOR SCREWSHAFT. 44

3.11.5(c) EQUIVALENT TWISTING MOMENT FOR MOTOR SHAFT. 44

3.11.6 EQUIVALENT BENDING MOMENT OF THE SHAFTS, . 44

3.11.6(a) EQUIVALENT BENDING MOMENT FOR GRINDER SHAFT. 45

3.11.6(b) EQUIVALENT BENDING MOMENT FOR SCREWSHAFT. 45

3.11.6(c) EQUIVALENT BENDING MOMENT FOR MOTOR SHAFT. 45

3.11.7 DIAMETER OF SHAFT, d. 45

3.11.7(a) DIAMETER OF GRINDER SHAFT. 46

3.11.7(b) DIAMETER OF SCREWSHAFT. 46

3.11.7(c) DIAMETER OF MOTOR SHAFT. 46

3.11.8 MAXIMUM SHEAR STRESS OF THE SHAFTS, ????max 46

3.11.8(a) MAXIMUM SHEAR STRESS OF GRINDER SHAFT. 47

3.11.8(b) MAXIMUM SHEAR STRESS OF SCREWSHAFT. 47

3.11.8(c) MAXIMUM SHEAR STRESS OF MOTOR SHAFT. 47

3.11.9 MAXIMUM BENDING STRESS OF THE SHAFTS, ????b(max) 47

3.11.9(a) MAXIMUM BENDING STRESS OF GRINDER SHAFT. 48

3.11.9(b) MAXIMUM BENDING STRESS OF SCREWSHAFT. 48

3.11.9(c) MAXIMUM BENDING STRESS OF MOTOR SHAFT. 48

3.12 FACTOR OF SAFETY.. 48

3.13 HEATING SYSTEM... 49

3.14 EFFICIENCY OF MACHINE.. 49

CHAPTER 4. 51

RESULTS AND DISCUSSION.. 51

4.1 PERFORMANCE EVALUATION.. 51

4.1.1 PRINCIPLE OF OPERATION OF THE BRIQUETTE MACHINE.. 51

4.1.2 DETAILED DESIGN ANALYSIS OF THE MACHINE ELEMENTS. 51

4.1.2(a) ANALYTICAL DESIGN OF THE EXTRUDER STAND FOR DEFLECTION.. 51

4.1.2(b) FINITE ELEMENT ANALYSIS OF THE EXTRUDER STAND.. 52

4.1.2(c) ANALYTICAL DESIGN OF THE ELECTRIC MOTOR STAND FOR DEFLECTION.. 54

4.1.2(d) FINITE ELEMENT ANALYSIS OF THE ELECTRIC MOTOR STAND.. 54

4.1.2(e) FINITE ELEMENT ANALYSIS OF THE HOPPER.. 56

4.1.2(f) FINITE ELEMENT ANALYSIS OF THE CONVEYOR.. 57

4.1.2(g) FINITE ELEMENT ANALYSIS OF THE SCREWSHAFT. 59

4.1.2(h) FINITE ELEMENT ANALYSIS OF THE DIE.. 61

4.2 BILL FOR ENGENERING MEASUREMENT AND EVALUATION (BEME) 63

CHAPTER 5. 64

CONCLUSION AND RECOMMENDATIONS. 64

5.1 CONCLUSION.. 64

5.2 RECOMMENDATIONS. 64

REFERENCES. 65

APPENDICES. 69

 

 

 

 

 

 

 

 

 

LIST OF FIGURES

 

FIGURE 1: Diagram showing the top of the frame. 35

FIGURE 2: Diagram showing the hopper. 36

FIGURE 3: Diagram of the grinder chamber. 37

FIGURE 4: Diagram of the chamber entrance. 38

FIGURE 5: Diagram of the grinder blade. 39

FIGURE 6: Diagram of the Grinder channel 40

FIGURE 7: Diagram of screwshaft housing. 41

FIGURE 8: Diagram of the Die. 42

FIGURE 9: Diagram of the Screwshaft 43

FIGURE 10: Diagram showing the diameters of the pulleys. 45

FIGURE 11: Diagram of the pulley with respect to the angle of contact 48

FIGURE 12: Diagram showing the various tension on the belts. 50

FIGURE 13: The diagram above shows the different fixed part of the machine. 65

FIGURE 14: The mesh diagram of the machine stand, showing the different nodes were the stresses are calculated. 65

FIGURE 15: The von mises analyses of the machine showing pictorially the deformation and the stresses at various point on the machine. 66

FIGURE 16: Diagram showing the different fixed point of the motor stand (the green point is welded while the electric motor rest on the purple point. 67

FIGURE 17: Diagram of mesh analysis, showing the different nodes were the stresses are calculated  68

FIGURE 18: Diagram showing the effects of maximum stress on various points of the motor stand  68

FIGURE 19: The diagram shows fixed points were the forces takes effect on the hopper. 69

FIGURE 20: The diagram showing the mesh analysis to analyze the different stresses at the nodes  69

FIGURE 21: Diagram showing the deformation of the hopper at maximum stress. 70

FIGURE 22: Diagram indicating the fixed points on the hopper. 70

FIGURE 23: The diagram showing the mesh analysis to analyze the different stresses at the nodes  71

FIGURE 24: Diagram showing the deformation of the conveyor at maximum stress. 71

FIGURE 25: Diagram indicating the fixed points on the screwshaft 72

FIGURE 26: The diagram showing the mesh analysis to analyze the different stresses at the nodes  72

FIGURE 27: Diagram showing the deformation of the conveyor at maximum stress. 73

FIGURE 28: Diagram indicating the fixed points on the screwshaft 73

FIGURE 29: The diagram showing the mesh analysis to analyze the different stresses at the nodes  74

FIGURE 30: Diagram showing the deformation of the die at maximum stress. 74

FIGURE 31: Skeletal diagram of the briquetting machine showing the components. 75


LIST OF TABLES

 

TABLE 1: Table shows the % ash that is left after burning (Grover & Mishra, 2011) 26

TABLE 2: The BEME table for the briquette machine. 64


LIST OF PLATES

 

PLATE 1: Overall mass of the extruder stand was calculated by solidworks. 84

PLATE 2: Overall mass of electric motor stand was calculated by SolidWorks. 85

PLATE 3: SolidWorks rendering of the grinder chamber with conveyor. 85

PLATE 4: SolidWorks rendering of the hopper. 86

PLATE 5: SolidWorks rendering of the screwshaft 86

PLATE 6: SolidWorks rendering of the briquette machine. 87

PLATE 7: Screwshaft under construction. 87

PLATE 8: Hopper under construction. 88

PLATE 9: Grinder blades under construction. 88

PLATE 10: Grinder chamber under construction. 89

PLATE 11: Die under construction. 89

PLATE 12: Fully constructed briquette machine. 90

PLATE 13: Final finish of the briquetting machine. 90

PLATE 14: Preliminary design drawing of the briquetting machine 1. 91

PLATE 15: Preliminary design drawing of the briquetting machine 2. 91

PLATE 16: Preliminary design drawing of the briquetting machine 3. 92

 

 

 

 


CHAPTER 1

INTRODUCTION

1.1  BACKGROUND OF STUDY

The world today is going green, everyone is thinking about alternative source of energy, the present and most popular form of energy fuel is known for its disadvantageous effect on the ozone layer in the atmosphere. First world countries like the USA, England, Russia and Germany are far ahead searching for alternative source to fuel energy most especially the latter who is the leading country in renewable energy for electricity generation. Developing countries are also looking for ways to go into other sources of energy apart from fossil fuel.For this reason, they have to look around and beyond their immediate environment to create energy.

Biomassareorganicmatterthatisrenewableoverthe course of time.Moresimply,biomassisreservedenergy(Zhang, 2012). Biomass is produced by green plants converting sunlight into plant material through photosynthesis and includes all land and water-based vegetation, as well as all organic wastes. With the principles of biomass, energy from immediate environment like agricultural waste, sawmill/carpentry waste, charcoal can be used to create energy in the form of Briquettes. Briquetting is the process of compaction of residues into a product of higher density than the original raw materials. It is also known as densification. The use of fuel wood for cooking has health implications especially on women and children who are disproportionately exposed to the smoke apart from environmental effects. Women in rural areas frequently with young children carried on their back or staying around them, spend one to six hours each day cooking with fuel wood(Oladeji, 2015). In some areas, the exposure is even higher especially when the cooking is done in an unventilated place or where fuel wood is used for heating of rooms. Generally, biomass smoke contains a large number of pollutants which at varying concentrations pose substantial risk to human health. Agro waste is the most promising energy resource. The decreasing availability of fuel woods has necessitated that efforts be made towards efficient utilization of agricultural wastes. These wastes have acquired considerably importance as fuels for many purposes, for instance, domestic cooking and industrial heating. Some of these agricultural wastes for example, coconut shell, wood pulp and wood waste can be utilized directly as fuels. These waste can be processed in a form whereby they are well compacted and hardened in form that they burn for a longer a time. These processes as earlier stated is called briquetting and it is produced with aid of a briquetting machine.

Briquetting can help in expanding the use of biomass in energy production, since densification improves the volumetric calorific value of a fuel, reduces the cost of transport and can help in improving the fuel situation in rural areas(Hussein et al., 2012). Briquetting is one of several agglomeration techniques which are broadly characterized as densification technologies. Agglomeration of residues is done with the purpose of making them denser for their use in energy production(Wright et al., 2010). The idea of briquetting is to use materials that are not otherwise usable due to a lack of density, compressing them into a solid fuel of aconvenient shape that can be burnt like wood or charcoal(Adekoya, 2007).

 

The compaction of loose combustible material for fuel-making purposes was a technique used by mostcivilizations in the past(Wilaipon, 2007). Biomass densification, otherwise known as briquetting of agro-residueshas been practiced for many years in several countries. Briquettes were discovered to be an importantsource of energy during the First and Second World Wars for heat and electricity production, using simpletechnologies (Yadong and Henry, 2014). During this period, briquetting of sawdust and other waste materialsbecame widespread in many countries in Europe and America under the impact of fuel shortages. Screwextrusion briquetting technology was invented and developed in Japan in 1945. As of April 1969, there were 638plants in Japan(Grover and Mishra, 2011). The methods used were no more than simple baling or drying.Industrial methods of briquetting dated back to the second part of the 19th century.

Fuel briquettes are essentially a compressed block of organic waste materials used for domestic cooking andheating. The final end product of briquetting process is known as a briquette. Briquettes are made from raw materials that are compacted into a mould. Briquette could be made of different shapes and sizes depending on the mould. The appearance, burning characteristics of briquettes depend on the type of feedstock and the level of compactness and the mould used(El Saeidy, 2004; Wilaipon, 2007). But in general, briquettes have better physical properties and combustion rate than the initial waste. Production of briquette charcoal helps to ease the pressure on the forest reserve, there by solving the deforestation problem.

Briquettes have many numerous uses which include both domestic and small industrial cottage applications (Ahmed et al., 2008). They are often used as a development intervention to replace firewood, charcoal, or other solid fuels. This is because with the current fuel shortage and ever rising prices, consumers are looking for affordable alternative fuels and briquettes fill this gap as it can be used for domestic cooking and water heating, heating productive processes as in tobacco curing, firing ceramics and clay wares such as improved cook stoves, fuel for gasifiers to generate electricity and in powering boilers to generate steam.

1.2STATEMENT OF THE PROBLEM

Recycling of waste product is a very good source of income, but unfortunately it is not taken very seriously in this part of the world. Rural communities around Africa generate a lot of agricultural waste. These waste are not properly disposed of and this results in pollution of the atmosphere. In as much as these waste are not well utilised, deforestation is also another issue. Trees are felled for the sole purpose of getting firewood for domestic cooking and other heating purposes. The smoke from the burning of this wood is very hazardous to human health as continuous inhalation may result in lung problems and/or other health problems. It also results in the global change in climatic conditions.

Briquetting technology facilitates the utilization of these biomass residues as a source of renewable energy in contrast to simply disposing of these residues. The end result is creation of jobs for the ever increasing unemployed youths in the society as well as the creation of wealth. In the long run, it tends to promote the economic growth of the country.

1.3 AIM AND OBJECTIVES

1.3.1 AIM

The main aim of this study is to design and construct a standard screw type biomass briquetting machine capable of producing briquettes from biomass.

1.3.2 OBJECTIVES

The specific objectives are to:

i.                    Design a screw type briquetting machine capable of grinding, forming, setting and drying biomass into full briquettes.

ii.                  Fabricate a user friendly and cost effective briquette

iii.                Collect sawdust from the local sawmill in the Effurun metropolis and groundnut shell from waste bins located around the school premises and use them to produce quality briquettes.

iv.                Produce durable biomass briquettes within a very short time with little effort.

 

1.4 SIGNIFICANCE OF THE WORK

Due to the increasing demand of energy and the constant importation of fuel from other countries, the need for optimization of local energy sources should be given much effort. Production and utilization of alternative energy sources such as briquettes can be of help to address the rising energy demands of the country.

As of 2005, Nigeria has the highest rate of deforestation in the world according to the Food and Agriculture Organization of the United Nations (FAO). Deforestation is considered to be one of the contributing factors to global climate change. The effects of these climate change on Nigeria is very clearly seen as we experience heavy rainfall during the wet season and the scorching heat from the sun during the dry season. The thick fumes that is being emitted from the firewood stove is also another cause of global warming, these fumes no matter how little, when combined with other emitted fumes can deplete the ozone layer. This project is therefore important as one of its objectives is to help reduce or completely eradicate deforestation.

This work is also important for the bakery industry in Nigeria as regards the poor state of electricity in the country. Lots of bakery factories especially the foreign ones are closing up in the country due to this issue, but most of the available ones have resorted to the local oven. But as stated earlier, these ovens are not eco-friendly. The use briquettes as an energy source in these bakeries for their baking activities would greatly reduce smoke produced from the local ovens.

Production of briquettes in commercial quantity would also be a form of diversification of the economy, considering the fact that raw materials needed to produce these briquettes are very cheap and can easily be gotten from agricultural wastes majorly in host rural communities. If produced in a larger scale, it could also go as far as creating employment for the youths in the community, through production and sales of briquettes to companies and individuals both in rural and urban settlements.

1.5 SCOPE OF THE WORK

 Briquettes produced by this machine will be sold at very low prices to the women selling roasted plantain and beans within the school premises in place of the charcoal they use. This could serve as a source of internally generated revenue for FUPRE.

Before now, biomass wastes are grinded in a grinding machine separately and then transferred manually to the briquetting machine where it is thoroughly mixed and compacted to give the strongly compacted briquettes. This research seeks to improve upon existing briquetting machines, as it proposes the fabrication of a grinder which will be attached to the hopper of the briquetting machine.  The grinder will be attached to the hopper of the machine such that, as the biomass wastes is grinded in the grinder, it moves immediately to the briquetting machine by means of a conveyor system where it is compressed to give the strongly compacted briquettes.

The sawdust samples were collected from the local wood market in Effurun. And the groundnut shell samples were collected from waste bins around FUPRE school premises.

The machine can be used for large production of briquettes.

DESIGN, FABRICATION AND TESTING OF A SCREW PRESS BRIQUETTING MACHINE

Additional Information

  • The Project Material is available for download.
  • The Research material is delivered within 15-30 Minutes.
  • The Material is complete from Preliminary Pages to References.
  • Well Researched and Approved for supervision.
  • Click the download button below to get the complete project material.

Frequently Asked Questions

In-order to give you the best service available online, we have compiled frequently asked questions (FAQ) from our clients so as to answer them and make your visit much more interesting.

We are proudly Nigerians, and we are well aware of fraudulent activities that has been ongoing in the internet. To make it well known to our customers, we are geniune and duely registered with the Corporate Affairs Commission of the republic of Nigeria. Remember, Fraudulent sites can NEVER post bank accounts or contact address which contains personal information. Free chapter One is always given on the site to prove to you that we have the material. If you are unable to view the free chapter 1 send an email to info@allprojectmaterials.com with the subject head "FREE CHAPTER 1' plus the topic. You will get a free chapter 1 within an hour. You can also check out what our happy clients have to say.


Students are always advised to use our materials as guide. However, if you have a different case study, you may need to consult one of our professional writers to help you with that. Depending on similarity of the organization/industry you may modify if you wish.


We have professional writers in various disciplines. If you have a fresh topic, just click Hire a Writer or click here to fill the form and one of our writers will contact you shortly.


Yes it is a complete research project. We ensure that our client receives complete project materials which includes chapters 1-5, full references, questionnaires/secondary data, etc.


Depending on how fast your request is acknowledged by us, you will get the complete project material withing 15-30 minutes. However, on a very good day you can still get it within 5 minutes!

What Clients Say

Our Researchers are happy, see what they are saying. Share your own experience with the world.
Be polite and honest, as we seek to expand our business and reach more people. Thank you.

Project Information

  • CATEGORY : MECHANICAL ENGINEERING
  • TYPE : PROJECT MATERIAL
  • FORMAT : MICROSOFT WORD
  • ATTRIBUTE : Documentation Only
  • PAGES : 95 Pages
  • CHAPTERS : 1 - 5
  • PRICE : ₦ 3,000.00

Share Links

Download Post
Download Post

Search for Project Topics

Project topics in Departments

Do you need a writer for your academic work?

Reviews:
A Review on design, fabrication and testing of a screw press briquetting machine, design, fabrication, testing project topics, researchcub.info, project topic, list of project topics, research project topics, journals, books, Academic writer.
Briquettes produced by this machine will be sold at very low prices to the women selling roasted plantain and beans within the school premises in place of the charcoal they use. This could serve as a source of internally generated revenue for FUPRE. Before now, biomass wastes are grinded in a grinding machine separately and then transferred manually to the briquetting machine where it is thoroughly mixed and compacted to give the strongly compacted briquettes. This research seeks to improve upon existing briquetting machines, as it proposes the fabrication of a grinder which will be attached to the hopper of the briquetting machine. The grinder will be attached to the hopper of the machine such that, as the biomass wastes is grinded in the grinder, it moves immediately to the briquetting machine by means of a conveyor system where it is compressed to give the strongly compacted briquettes... mechanical engineering project topics

DESIGN, FABRICATION AND TESTING OF A SCREW PRESS BRIQUETTING MACHINE