DESIGN AND FABRICATION OF A SIMPLE LOW COST WASHING MACHINE SUITABLE FOR WASHING POLYETHYLENE MATERIALS


DESIGN AND FABRICATION OF A SIMPLE LOW COST WASHING MACHINE SUITABLE FOR WASHING POLYETHYLENE MATERIALS

Type: Project Materials | Format: Ms Word | Attribute: Documentation Only | Pages: 57 Pages | Chapters: 1-5 chapters | Price: ₦ 3,000.00

2,374 marked this research material reliable.
Call or whatsapp: +2347063298784 or email: info@allprojectmaterials.com
Excellent and professional research project topics and materials website. All the research tools, journals, seminars, essays, article, books, term papers, softwares and project materials for your research guide and final year projects are available here.

CHAPTER ONE

1.0:     INTRODUCTION

1.1.      BACKGROUND OF STUDY

Industrial and domestic application of polyethylene materials is on the increase and they are non-biodegradable materials ,as thus they are best recycled.

Waste generally render our environment unfriendly and the worst of them all are those waste that are non-biodegradable and as such, waste of these forms (non-biodegradable) pose a serious threat to our environment.

One of these categories of non-biodegradable waste is pure water sachets. They are found in virtually every part of Nigeria and various attempts have been made to biodegrade most pure water sachets. Most plastics and polythene / pure water nylon wastes are usually thrown in public drains, roads and open places to public view in most parts of the country

 These wastes are used at times as a combustion aid for burning other organic refuse and this liberates toxic vapours or gases that pollute the air and causes inconveniences to residents living near the landfill sights. (New, 1986). Their values as reclaimed or recycled waste is considerably higher than their values as energy source (Andrew and Subramaman, 1992). Accordingly, well – known destructive techniques such as incineration or pyrolysis (Leidnor, 1981), seem quite wasteful, and hence, recycling of plastic wastes is the best method for solving both the environmental and economic problems associated with plastic waste disposal.

Recycling of plastic waste is rapidly developing in almost every society and this is largely based on the environmental awareness, need to conserve materials and energy, and growing demand to increase production economy (La Mantia, 1993 and Chatterjee and Kumar, 2009). Many private industries and few government agencies are now engaging in recycling of plastic and polythene/nylon wastes.

Recycling of plastic/nylon waste could be achieved through chemical or mechanical recycling method. The chemical means involve sow out recycling process (Kmpouris et al; 1995), floatation (Dilly.louis, 1999) and selective dissolution techniques (Herbery et al; 1992). On the other hand, mechanical recycling involves the use of machines in converting the waste into recycle products, which can be re-used in now application (Jost, 1995). Recycling of plastic using machines involves washing, shredding, extruding and injection molder. A washing machine is used in washing polythene materials as a way to reduce the manual labour spend and to wash the polythene material effectively and it saves time.

Loading condition is important in designing a washing machine. Efficiency and Other Factors

May vary due to net loading conditions. Generally there are two types of loading condition. Can be seen in washing machine.

 

1.2.      STATEMENT OF THE PROBLEM

Recycling of polythene material requires that the materials be free of impurities such as oils, dust etc. This project seeks to address this by developing a washing machine for the purpose of recycling of polythene material. Washing of polyethylene material with our hands may result to the following problems e.g. inefficiency, time and labour cost. The primary motivations for development of a polythene washing machine is to save time and labour, and to improve speed and efficiency.

1.3.      AIMS AND OBJECTIVES OF THE WORK

1.3.1.   AIM OF PROJECT

To develop a simple low cost  washing machine suitable for washing polyethylene materials.

1.3.2.   OBJECTIVES OF THIS PROJECT

The following are the purpose for which this design project will meet the aim mentioned above.

i)          To select materials available locally suitable for respective components of the machine

ii)         To Determine Optimum dimensions of the different components

iii)        Fabricate the machines based on designed dimensions.

iv)        Test the machine to determine efficiency and effectiveness in comparison to manual washing.

1.4.      SIGNIFICANCE OF THIS PROJECT

Waste generally render our environment unfriendly and the worst of them all are those waste that are non-biodegradable and as such waste of these forms post a serious threat to our environment.

v  To wash manually requires too much time ,effort, and man power. 

v  Traditional washing are in-efficient.

v  High level of waste polyethylene materials calls for need to recycle these materials.

v  Burning of these materials causes green gas effect and air pollution

v  Waste of land transportation resources when use for landfill purposes.

1.5.      SCOPE OF THIS PROJECT

This work is delimited to the design and fabrication of washing machine suitable for recycling of polyethylene materials.

DESIGN AND FABRICATION OF A SIMPLE LOW COST WASHING MACHINE SUITABLE FOR WASHING POLYETHYLENE MATERIALS

Additional Information

  • The Project Material is available for download.
  • The Research material is delivered within 15-30 Minutes.
  • The Material is complete from Preliminary Pages to References.
  • Well Researched and Approved for supervision.
  • Click the download button below to get the complete project material.

Frequently Asked Questions

In-order to give you the best service available online, we have compiled frequently asked questions (FAQ) from our clients so as to answer them and make your visit much more interesting.

We are proudly Nigerians, and we are well aware of fraudulent activities that has been ongoing in the internet. To make it well known to our customers, we are geniune and duely registered with the Corporate Affairs Commission of the republic of Nigeria. Remember, Fraudulent sites can NEVER post bank accounts or contact address which contains personal information. Free chapter One is always given on the site to prove to you that we have the material. If you are unable to view the free chapter 1 send an email to info@allprojectmaterials.com with the subject head "FREE CHAPTER 1' plus the topic. You will get a free chapter 1 within an hour. You can also check out what our happy clients have to say.


Students are always advised to use our materials as guide. However, if you have a different case study, you may need to consult one of our professional writers to help you with that. Depending on similarity of the organization/industry you may modify if you wish.


We have professional writers in various disciplines. If you have a fresh topic, just click Hire a Writer or click here to fill the form and one of our writers will contact you shortly.


Yes it is a complete research project. We ensure that our client receives complete project materials which includes chapters 1-5, full references, questionnaires/secondary data, etc.


Depending on how fast your request is acknowledged by us, you will get the complete project material withing 15-30 minutes. However, on a very good day you can still get it within 5 minutes!

What Clients Say

Our Researchers are happy, see what they are saying. Share your own experience with the world.
Be polite and honest, as we seek to expand our business and reach more people. Thank you.

Project Information

  • CATEGORY : MECHANICAL ENGINEERING
  • TYPE : PROJECT MATERIAL
  • FORMAT : MICROSOFT WORD
  • ATTRIBUTE : Documentation Only
  • PAGES : 57 Pages
  • CHAPTERS : 1 - 5
  • PRICE : ₦ 3,000.00

Share Links

Download Post
Download Post

Search for Project Topics

Project topics in Departments

Do you need a writer for your academic work?

Reviews:
A Review on design and fabrication of a simple low cost washing machine suitable for washing polyethylene materials, washing, design, fabrication project topics, researchcub.info, project topic, list of project topics, research project topics, journals, books, Academic writer.
Recycling of polythene material requires that the materials be free of impurities such as oils, dust etc. This project seeks to address this by developing a washing machine for the purpose of recycling of polythene material. Washing of polyethylene material with our hands may result to the following problems e.g. inefficiency, time and labour cost. The primary motivations for development of a polythene washing machine is to save time and labour, and to improve speed and efficiency... mechanical engineering project topics

DESIGN AND FABRICATION OF A SIMPLE LOW COST WASHING MACHINE SUITABLE FOR WASHING POLYETHYLENE MATERIALS