FABRICATION OF METAL PANEL DOOR

Type: Project Materials | Format: Ms Word | Attribute: Documentation Only | Pages: 54 Pages | Chapters: 1-5 chapters | Price: ₦ 3,000.00

1,738 marked this research material reliable.
Call or whatsapp: +2347063298784 or email: info@allprojectmaterials.com
FABRICATION OF METAL PANEL DOOR

ABSTRACT

  This project report is based on fabrication of metal door. Metal door is a movable structure use to close off an entrance typically consisting of a panel that swings on hinges or slide or rotate. The metal door is more reliable and strong and much more have good looking appearance than the others doors like wooden door, leather door. E.t.c.  The locally available material [e.g mild steel] of different shapes, forms and format were available indigenous technology without compromising the standard. The door constructed was subjected to different to different test and it was found efficient and has the strength to provide adequate security at affordable price the metal door consist of the adequate frame unit the door consists of the frame unit, the panel, the bolt, the stopper as the major units.

Since privacy and security are major essential needs in their various homes and offices, etc. which thereby gives rise to the need for doors among other security devices. Ability to have access to door of quality high long span at low affordable price to an average Nigeria has been a problem.

TABLE OF CONTENTS

Title page

Approval page

Dedication

Acknowledgement

Abstracts

Table of contents


CHAPTER ONE
Introduction

1.1 Definition

1.2 Types

1.3 Need for metal panel door

1.4 Aims and objectives

CHAPTER TWO
Analysis of Alternative Method and Choice of Best Alternatives

2.10 Types of door mechanism

2.20 Literature review

CHAPTER THREE
General Description of Component and it Working Principle

3.1 Description of component part.

3.1 Working principle

CHAPTER FOUR
Design Calculation


CHAPTER FIVE
Selection of Material

5.1 Mechanical properties

5.2 Physical properties

5.3 Corrosion resistance

5.4 Economic properties

5.5 Environmental properties

CHAPTER SIX Conclusion and Recommendation

6.1 Conclusion

6.2 Recommendation

6.3 Reference


CHAPTER ONE

1.0 INTRODUCTION

Furthermore, door made with wood are very risky to be put at open place. This is because doors made with wood when faced with water frequently, it gets damaged. In addition, termites could make the lifespan of wooden doors short.

Meanwhile, based on the aforementioned reasons and also the urge to improve technologically, so as technologist in training, we have come up with a design to serve as an alternative means of making doors of different patterns of today. The patterns that seems to give the door a long lifespan and serves as a means of security to lives of man and properties.

1.1 DEFINITION OF DOOR

Door can be defined as hinges, sliding, or revolving barrier at the entrance to a buildings, vehicles, pieces of furniture etc.(Oxford English Mini-Dictionary 5th Edition).

Door can also be defined as a movable flat or panel surface that open and closes the entrance to a building, Hornby A.S{1995}

1.2 TYPES OF DOOR

There are different types of doors depending on their purposes, material of manufacture, durability, personal requirement etc. Some types of doors are listed below:

Ø Timber/wooden door

Ø Steel door

Ø Frame and panel door

Ø Glass door

Ø Battened and ledge doors

Ø Flush door

Ø Aluminum door

Ø Glass door e.t.c.


1.3 THE NEED FOR METAL PANEL DOOR

The needs for metal panel door in our modern generation are listed as follows:

v It last longer than any other door

v It is of high strength and presentable

v For the purpose of securing both life and property

v It gives no easy access for bugler and thieves.


1.4 AIMS AND OBJECTIVES

FABRICATION OF METAL PANEL DOOR

Additional Information

  • The Project Material is available for download.
  • The Research material is delivered within 15-30 Minutes.
  • The Material is complete from Preliminary Pages to References.
  • Well Researched and Approved for supervision.
  • Click the download button below to get the complete project material.

Frequently Asked Questions

In-order to give you the best service available online, we have compiled frequently asked questions (FAQ) from our clients so as to answer them and make your visit much more interesting.

We are proudly Nigerians, and we are well aware of fraudulent activities that has been ongoing in the internet. To make it well known to our customers, we are geniune and duely registered with the Corporate Affairs Commission of the republic of Nigeria. Remember, Fraudulent sites can NEVER post bank accounts or contact address which contains personal information. Free chapter One is always given on the site to prove to you that we have the material. If you are unable to view the free chapter 1 send an email to info@allprojectmaterials.com with the subject head "FREE CHAPTER 1' plus the topic. You will get a free chapter 1 within an hour. You can also check out what our happy clients have to say.


Students are always advised to use our materials as guide. However, if you have a different case study, you may need to consult one of our professional writers to help you with that. Depending on similarity of the organization/industry you may modify if you wish.


We have professional writers in various disciplines. If you have a fresh topic, just click Hire a Writer or click here to fill the form and one of our writers will contact you shortly.


Yes it is a complete research project. We ensure that our client receives complete project materials which includes chapters 1-5, full references, questionnaires/secondary data, etc.


Depending on how fast your request is acknowledged by us, you will get the complete project material withing 15-30 minutes. However, on a very good day you can still get it within 5 minutes!

What Clients Say

Our Researchers are happy, see what they are saying. Share your own experience with the world.
Be polite and honest, as we seek to expand our business and reach more people. Thank you.

A Research proposal for fabrication of metal panel door:
Reviews: A Review on fabrication of metal panel door, fabrication, metal, panel project topics, researchcub.info, project topic, list of project topics, research project topics, journals, books, Academic writer.
This project report is based on fabrication of metal door. Metal door is a movable structure use to close off an entrance typically consisting of a panel that swings on hinges or slide or rotate. The metal door is more reliable and strong and much more have good looking appearance than the others doors like wooden door, leather door. E.t.c. The locally available material [e.g mild steel] of different shapes, forms and format were available indigenous technology without compromising the standard. The door constructed was subjected to different to different test and it was found efficient and has the strength to provide adequate security at affordable price the metal door consist of the adequate frame unit the door consists of the frame unit, the panel, the bolt, the stopper as the major units... mechanical engineering project topics

FABRICATION OF METAL PANEL DOOR

Project Information

  • CATEGORY : MECHANICAL ENGINEERING
  • TYPE : PROJECT MATERIAL
  • FORMAT : MICROSOFT WORD
  • ATTRIBUTE : Documentation Only
  • PAGES : 54 Pages
  • CHAPTERS : 1 - 5
  • PRICE : ₦ 3,000.00

Share Links

Download Post
Download Post

Search for Project Topics

Project topics in Departments

Do you need a writer for your academic work?