TABLE OF CONTENTS
CHAPTER ONE
1.0 Introduction
1.1 Definition of a panel door
1.2 Classification of a door
1.3 Objectives of the project
1.4 Significance of the project
CHAPTER TWO
2.0 Timber
2.1 Definition of timber
2.2 Growth of timber
2.3 Types of timber
2.4 Conversion of timber
2.5 Methods of conversion of timber
2.6 Characteristics of a timber
CHAPTER THREE
3.0 Seasoning of timber
3.1 methods of seasoning
3.2 Importance of timber seasoning
3.3 preservation of timber
3.4 Ways of timber preservation
3.5 Uses of timber
3.6 What is a wood
3.7 Classification of trees
3.8 Characteristic of hard and soft wood
3.9 Types of wood
CHAPTER FOUR
4.0 Construction of the panel door
4.1 Estimation (materials list) of a panel door
4.2 Hand tools
4.3 Machine used
3.4 Assemble procedure
3.5 Diagram of a panel door
CHAPTER FIVE
5.0 Joint
5.1 Definition
5.2 Types of joints
5.3 Finishing materials used in a panel door
5.4 Conclusion
5.5 References
CHAPTER ONE
INTRODUCTION TO DOOR
A door is a solid barrier that is fixed in an opening in a wall to hinge , pivot or slide pen (or close).
The door opening or door way allows access and agrees from
building and between rooms, compartments and corridors. As a component
part of a wall he door and if frame are integral to the overall
performance of the wall.
Doors are meant to provide access to the room of a building.
They may be constructed of wood, plywood, glass, metal or a combination
of these materials they are located in such a way that easy movement and
privacy of the room is achieved. For this reason the door are generally
placed at the corner of the room in one line. This provides good
ventilation and easy movement of the users.
1.1 DEFINITION OF A DOOR
A door can be defined as a hinged, sliding or revolving barrier at
the entrance of a building, room or vehicle or in the framework of a
cupboard.
1.2 CLASSIFICATION OF A DOOR
Wood door may be classified as:
- Paneled doors
- Flush doors
PANELED DOOR
Paneled doors are frame with stiles and rails around a
panel or panel of wood or ply wood because the door is hinged on the
side to open, it tends to sink on the lock stile.
The stile and rails have to be joined to resist the tendency of the doors to sink.
FLUSH DOOR
A variety of flush doors are manufactured with plain flush
faces both sides and fibreboard facing press moulted often with
comparatively shallow sinking to resemble the appearance of a paneled
door.
1.3 OBJECTIVES OF THE PROJECT
This project is aimed at using timber towards the construction of the panel door by the carpenters.
It will try to examine some of the importance of timber to
the student while undertaking the project endeavour in using timber in
the construction of a pane door.
1.4 SIGNIFICANCE OF THE STUDY
The essence of this project is to draw the attention of the
students, carpenters and individuals in constructing a panel door using
timbers.
This research draws the attention of the individuals to the
need of timber for construction of a panel door as well as its uses in
storing and making a panel door.