Fabrication of Dental Wet Curing Units

2,020 marked this research material reliable.
Call or whatsapp: +2347063298784 or email: info@allprojectmaterials.com
Department: mechanical engineering project topics | Type: Project Topics | Project Topics and Materials | List of Project Topics | Research Project Materials | Journals | Thesis | Articles | Online Project Materials | Business Plan | Final year project topic | Format: Ms Word and PDF | Attribute: Documentation Only | Pages: 100 Pages | Chapters: Complete Research work from Chapter 1 to 5; All chapters | Inclusive: Abstract, Preliminary Pages, Table of Contents and Appendices | Cost: ₦ 5,000.00

Fabrication of Dental Wet Curing Units

PROJECT TOPICS AND MATERIALS ON Fabrication of Dental Wet Curing Units

Denture base materials are used to contact the oral tissues and support artificial teeth


(Powers and Wataha, 2014). Since the 18th century, a wide variety of denture materials have been introduced to replace missing teeth and their associated structures. Wax was the first material used for intra-oral impressions and models; then ivory was used by carving it into the required denture shape. However, ivory’s hygienic prospect limited its use, and in 1728 Fauchard suggested making dentures from porcelain (Fauchard, 1728), assuming that it could be more attractive and coloured as required as well as more hygienic (Young, 2010). In 1744, Duchateau produced the first recorded porcelain denture (Murray and Darvell, 1993).


In the 1850s, a cheap and easy to handle vulcanite material was identified, and this was used to replace unhygienic costly ivory and porcelain dentures. Vulcanite produced accurately fitting prostheses at reasonable cost, making it accessible to a large number of consumers (Khindria et al., 2009). Vulcanite denture bases were fitted with porcelain teeth requiring mechanical retention due to lack of chemical bonding between the vulcanite denture base material and the porcelain teeth. Techniques were established to improve this bonding by making undercut holes in posterior porcelain teeth and placing pins in anterior teeth (Engelmeier, 2003; Young, 2010). Nonetheless, this material became less satisfactory due to its lack of translucency which affected the aesthetic results; additionally, its porosity had the potential to increase the accumulation of plaque and oral fluids which consequently made the denture base unhygienic (Young, 2010). Many synthetic polymers such as polyamides, epoxy resin, polystyrene, polyvinyl acrylic, rubber graft copolymers, polycarbonate and polymethylmethacrylate have been developed and tested as potential alternative denture base materials (Stafford et al., 1980; Stafford et al., 1986). These are organic molecules of many repeating segments (Powers and Wataha, 2014), but may not generally prove successful since many of them are susceptible to distortion due to water sorption as well as being soluble in most solvents, including chloroform (Van Noort, 2013), although some rubber-reinforced polymers of higher impact strength have been used to reduce the risk of fracture (Powers and Wataha, 2014).


Metals and alloys have been introduced for dental application and used in a number of restorations in dentistry by means of casting techniques (Van Noort, 2013; Powers and Wataha, 2014). Great improvements have been made in the physical and mechanical properties of these base metal alloys and their application could outstrip that of the rarely and costly pure metals (Luthy et al., 1996; Powers and Wataha, 2014). However, for the last two decades their uses have been limited due to their performance or biocompatible risks.

DOWNLOAD COMPLETE WORK FOR Fabrication of Dental Wet Curing Units

Additional Information

  • The Project Material is available for download.
  • The Research material is delivered within 15-30 Minutes.
  • The Material is complete from Preliminary Pages to References.
  • Well Researched and Approved for supervision.
  • Click the download button below to get the complete project material.

Frequently Asked Questions

In-order to give you the best service available online, we have compiled frequently asked questions (FAQ) from our clients so as to answer them and make your visit much more interesting.

We are proudly Nigerians, and we are well aware of fraudulent activities that has been ongoing in the internet. To make it well known to our customers, we are geniune and duely registered with the Corporate Affairs Commission of the republic of Nigeria. Remember, Fraudulent sites can NEVER post bank accounts or contact address which contains personal information. Free chapter One is always given on the site to prove to you that we have the material. If you are unable to view the free chapter 1 send an email to info@researchcub.info with the subject head "FREE CHAPTER 1' plus the topic. You will get a free chapter 1 within an hour. You can also check out what our happy clients have to say.

Students are always advised to use our materials as guide. However, if you have a different case study, you may need to consult one of our professional writers to help you with that. Depending on similarity of the organization/industry you may modify if you wish.

We have professional writers in various disciplines. If you have a fresh topic, just click Hire a Writer or click here to fill the form and one of our writers will contact you shortly.

Yes it is a complete research project. We ensure that our client receives complete project materials which includes chapters 1-5, full references, questionnaires/secondary data, etc.

Depending on how fast your request is acknowledged by us, you will get the complete project material withing 15-30 minutes. However, on a very good day you can still get it within 5 minutes!

What Clients Say

Our Researchers are happy, see what they are saying. Share your own experience with the world.
Be polite and honest, as we seek to expand our business and reach more people. Thank you.

A Research proposal for fabrication of dental wet curing units:
Reviews: A Review on fabrication of dental wet curing units, fabrication, dental, curing project topics, researchcub.info, project topic, list of project topics, research project topics, journals, books, Academic writer.
Despite the fact that the material scientists and researchers have continued to improve the physical and mechanical properties of the materials used in dentistry, none of these materials fulfill all the ideal properties. Any new material used for denture provision, regardless of the method of construction, should aim to improve on what has gone before. To enable this, it is essential to overcome some of the material problems by testing the characteristics and analyzing their performance in practical applications. Many properties need to be taken into consideration in assessing the dental restorative performance of these materials. Therefore, such assessment is one of the most crucial basic factors in selecting material for dental uses... mechanical engineering project topics

Fabrication of Dental Wet Curing Units

Project Information

Share Links

Download Post (MsWord)
Download Post (PDF)

Search for Project Topics

Project topics in Departments

How much does it cost to hire a writer in Nigeria?

Looking for Professional Approach and Quality Research Services ?

Estimating the cost of research writing in Nigeria: Freelance writers in Nigeria may charge depending on the project, depending on the factors mentioned earlier. Plagiarism-focused content may be on the higher end of this range due to the additional skills and research involved. For a more accurate estimate, it's recommended to reach out with us, discuss your specific requirements, and request a quote based on the scope of your project. Prices can vary, so getting personalized quotes will help you determine the cost more precisely.