MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS

Download complete research materials on MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS for your research project

CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE

This research project material is available: CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE.

This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system. The report is therefore divided into chapters and each chapter discussed extensively such that an illiterate refrigerator mechanic who read and comprehends the report can easily carryout the construction of refrigerator under little guidance and supervision.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 65 Pages| Chapters: 1-5 chapters

Share this post on:

CONSTRUCTION OF A STANDARD BANKING OVEN WITH DUAL POWER SOURCE (ELECTRIC/GAS)

This research project material is available: CONSTRUCTION OF A STANDARD BANKING OVEN WITH DUAL POWER SOURCE (ELECTRIC/GAS).

This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about energy specially the conversions of electrical energy to thermal energy, conduction and conventional heat transfer etc.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 41 Pages| Chapters: 1-5 chapters

Share this post on:

CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

This research project material is available: CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT.

This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of kerosene and gas for cooking and drying which are often not available due to scarcity of these products, however, the project students have employed the use of electricity which is rending available.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 28 Pages| Chapters: 1-5 chapters

Share this post on:

CONSTRUCTION OF TWO FACE GAS BURNER

This research project material is available: CONSTRUCTION OF TWO FACE GAS BURNER.

The construction of a two-face gas burner as a project topic that we embark upon become necessary as a way of way of putting into application the engineering and technological knowledge acquired so far. It is a starting point of actualizing a functional technology in the country. Irrespective of the fact that there are several breads of gas burners in the market, especially the ones imported, we deemed it necessary to work further on it as a way of modifying the brand with cast not left out in such modification.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 55 Pages| Chapters: 1-5 chapters

Share this post on:

DESIGN A ND FABRICATION OF A DUST EXTRACTOR

This research project material is available: DESIGN A ND FABRICATION OF A DUST EXTRACTOR.

Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not having them thereby making dust a very dangerous threat to man.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 45 Pages| Chapters: 1-5 chapters

Share this post on:

DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

This research project material is available: DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE.

The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle which is attached to the shaft. A helical spring that is incorporated to the shaft of the punch, helps the handle return to its initial position, which makes the machines tedious and stressful to operate. When the handle is pulled down from its initial position, the punch passes through the die that is placed vertically adjacent to the punch thereby blanking out the felt materials.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 65 Pages| Chapters: 1-5 chapters

Share this post on:

DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER FOR DOMESTIC USE

This research project material is available: DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER FOR DOMESTIC USE.

Solar energy is the light which come in form of electromagnetic radiation. Electromagnetic radition is a wave like phenomenon that move energy across distance. Solar energy is the most abundant continuing source of energy available to the human race. Solar energy is not being used as primary sources of fuel energy but a large research and development effort has being underway to develop economical systems to harness solar energy as a major source of energy particularly for the heating and cooling of buildings.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 67 Pages| Chapters: 1-5 chapters

Share this post on:

DESIGN AND CONSTRUCTION OF A SPIN DRYER

This research project material is available: DESIGN AND CONSTRUCTION OF A SPIN DRYER.

This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideration of its ease of production, maintenance and servicing.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 62 Pages| Chapters: 1-5 chapters

Share this post on:

DESIGN AND CONSTRUCTION OF A SUBMARINE HULL

This research project material is available: DESIGN AND CONSTRUCTION OF A SUBMARINE HULL.

This project entails the systematic approach used by the authors to design and construct a submarine hull which is watertight to at least a depth of one meter. A NACA 6- series airfoil shape was used because of its emphasis on maximizing laminar flow, owing to the fact that resistance can be reduced by maintaining a laminar boundary layer. Included is detailed literature research acting as a basis of the design, results from resistance test and other relevant information. Results obtained from final calculation showed L: D ratio as 5.0 and the drag at 2.57m/s to be 354.022N.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 68 Pages| Chapters: 1-5 chapters

Share this post on:

DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE

This research project material is available: DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE.

To achieve this preliminary experiment was carried out to determine the optimum speed of this machine various design alternatives for achieving the design solution were synthesized and a choice of an economic method which would satisfy the objective was made. Based on the principles guiding the performance of the machine, the dimensions and sizes of the various components were established.

Download Complete Project Material Project Category:

Type: Project Materials| Format: Ms Word| Attribute: Documentation Only| Pages: 65 Pages| Chapters: 1-5 chapters

Share this post on:


About

All Project Materials Inc. is a web based company in assisting and guiding Final Year Students with well researched and quality project topics, project works, research guides and project materials. With our vast data base, students can have access to numerous term papers, Seminar papers, essays and contemporary project topics and materials in each department of their various institutions. Complete Abstract, table of content and chapter 1 is given for FREE on this site for students.

How we Work:
  • Simply browse through our research project library, view our free chapter 1 or table of content or abstract.

  • Place an order to request for complete research material, kindly provide all necessary contact details to enable us reach out to you if need be.

  • Once payment is confirmed, a download code will be sent to you. Which you will have access to download the project materials.

Blog

WRITING CHAPTER THREE, RESEARCH METHODS

Research Design: this has to do with the structure of the research instrument to be used in collecting data. It could be in sections depending on different variables that forms the construct for the entire topic of the research problems. A reliable instrument wit...

HOW SHOULD THE TABLE OF CONTENT BE?

Researcher must know that the table of content in computer science and other related courses are not the same with other courses. Especially chapter three and chapter four which include research methodology and research design ( for old and new system) and design...

Contact

Student researchers and independent researchers willing to visit our research library and get access to over 25,000+ research projects and journals in hard copies can contact us directly by visiting:

Website:

https://www.researchcub.info

Phone:

+234 70 6329 8784

Email Address:

For enquries: [email protected]

Whatsapp:

+234 70 6329 8784



Copyright © researchcub.info | Terms of Use| Disclaimer| Privacy Policy